Polycraft Boats

3.00 Tuff Tender – Open Boat

The 3.00 Tuff Tender was originally designed for use as a tender for larger craft and is a popular choice in this category as polyethylene is not abrasive against gel coated and painted surfaces.

The ever popular 3M Tuff Tender is the first model in the Polycraft range to receive the Aquathene treatment and has shed an amazing 18kg.

This great little dinghy now weighs just 75kg plus 8kg of foam*, can still accept a 15hp outboard and comes with a four year warranty. In comparison the Quintrex 3.1m Dart weighs 61kg but can only accept an 8hp outboard and is only covered by a three year warranty.

Due to the Tuff Tender’s awesome stability and safety attributes born from its dual skin and tri hull design, it has become an increasingly accepted option as a small fishing boat for protected waterways and freshwater impoundments.

The recessed stainless steel handles make it easy for two people to carry, while also providing lifting points for davits.

The moulded anchor well, cleat and stainless steel shackle ensure easy towing, anchoring and mooring.

Standard Features

• 3.0 Hand Rails
• 3.0 Rod Holder
• 3.0 Rowlocks
• 3.0 Transom Plate
• Anchor Well
• Bow Shackle
• Cleat

Available in 3 models:

– Open Boat
– Centre Console
– Side Console

4.10 Challenger – Open Boat

The 4.10 Challenger Open is suitable for recreational fishing and boating in creeks and protected bays.

The hull is a V-nose punt design, with reverse chines to provide awesome stability at rest and responsive turning at speed.

The soft, quiet ride distinguishes the 4.10 Challenger from many boats in its class as the Polyethylene hull absorbs on water vibrations and noise into the hull and not its occupants.

The 4.10 Open has high sides for safe boating and has a well laid out interior that provides storage for safety equipment, fishing tackle, fuel tank and other gear.

It is a popular choice for creek fishing and crabbing.

4.10 Challenger – Centre Console

Enjoy all the great features of the 4.10 Challenger Centre Console which has the benefit of a central helm position for great all round visibility, while at the same time retaining a substantial open floor area.

The Centre Console has extra storage facilities within the console while still allowing easy access to the front and rear storage bins and casting decks.

All your electronic equipment such as sounders and engine gauges can be conveniently located on the centre console dash for easy viewing and operation.

The forward positioning of the console enhances the balance and performance of the boat.

The pronounced reverse chines on the 4.10 Centre Console provide an incredible degree of stability when it is at rest and underway.

4.10 Challenger – Side Console

The 4.10 Challenger Side Console with its well laid out interior is the boat for creeks and freshwater impoundments.

The Side Console comes standard with an upholstered swivel seat and pedestal box that has built in storage facilities for batteries and/or fishing tackle.

The contoured side console is fitted with a tinted windscreen to help keep the driver and electronics protected from wind and spray.

There is also additional dry storage facilities located within the console itself.

The 4.10 Challenger Side Console is suitable for competition Bream and Bass fishing as the twin 110 litre front storage bins can easily be converted into livewells etc.

The boat also sports a large front and rear casting deck which all serious anglers will appreciate.

Available in 5 models:

– Open Boat
– Centre Console
– Side Console
– Runabout
– Frontrunner

4.50 Drifter – Open Boat

The 4.50 Drifter Open is extremely popular due to its clean, open and uncluttered deck, its soft quiet ride and all round boating capabilities.

The 4.50 Drifter Open can be towed by a conventional four cylinder car and is easily launched and retrieved by one person.

The deep V entry of the hull makes it suitable for a wide range of fishing and boating applications – from dams and estuaries right through to the more open bays and inshore reefs.

The 4.50 Drifter Open comes with a great range of standard features as detailed below.

4.50 Drifter – Centre Console

The console unit is located in a central position for all-round visibility while also maximising available floor space for fishing and other boating activities.

The console provides protection for both driver and dash mounted electronics.

Access to the front casting deck and anchor well area is unobstructed, with ample room between the console and side walls.

The 4.50 Drifter Centre Console is available in eight great, classic Polycraft colours.

4.50 Drifter – Side Console

The 4.50 Drifter Side Console is a brilliantly laid out boat for the hardcore fisherman. If you want the benefit of steering from a seated helm position, while at the same time retaining a large amount of useable floor space, then the brilliant 4.50 Drifter Side Console is the answer.

The driver is positioned in the rear starboard corner, behind a console unit which provides protection from the elements and also great visibility.

The console unit can be used to mount electronics, such as sounders and engine gauges, and also has built in dry storage facilities.

The 4.50 Drifter Side Console comes in eight great, classic Polycraft colours and is a real catch for those keen on their angling.

With generous storage under the split front hatch, as well as in the two huge rear storage seats, this boat is built for the fisherman and boater who likes to keep a tidy deck.

4.50 Drifter – Runabout

The 4.50 Runabout is the new kid in town!. It features a low profile bonnet with split windscreen, two comfortable seats and dry bow storage.

4.50 Drifter – Frontrunner

The 4.50 Drifter Frontrunner offers all the benefits of a bow rider, and is an excellent choice for the family and weekend boater.
The bow storage/cast deck provides for seating and storage in the bow and has padded cushions available as an option.

Two consoles located mid ships for driver and passenger provide protection from the elements. The boat features comfortable upholstered seating positions.

The dash layout provides easy access and viewing of all electronics and gauges, while the consoles themselves contain large storage facilities.

More seating is located aft via the two storage seats for storage of larger items such as life jackets and batteries. These also have a drop in bait/storage bin available as an option

Stainless steel bow and hand rails are standard.

A 70-litre underfloor fuel tank is available as an option for those extended trips. An easy access fuel filling position is located on the gunwale for trouble free refuelling.

The main attraction of the 4.50 Drifter Frontrunner is not its good looks and versatility, but rather it’s awesome on water performance. Like all the other Polycrafts, the soft and quiet ride has to be experienced to be believed.

Available in 5 models:
– Centre Console
– Side Console
– Rear Centre Console
– Frontrunner
– Cuddy Cabin

4.80 Brumby – Centre Console

The 4.80 Brumby Rear Centre Console has built a huge reputation as a premier fishing craft in the short time it has been available on the market.

The 4.80 Brumby Rear Centre Console has a large open forward deck space and is the choice for those who are serious about their sport of fishing.

The console is situated in the central aft section of the boat, where the fold down rear lounge provides seating for the driver and crew. The rear fold down lounge can be either folded away when not in use or utilized as a rear casting deck.

If a full height front casting deck is required then the optional front lounge and front casting deck insert is available.

Stainless steel bow and hand rails are standard, as is the 70 litre underfloor fuel tank for extended trips.

The 4.80 Brumby Rear Centre Console has good looks and versatility, but it’s the awesome on water performance that has to be experienced to be believed.

4.80 Brumby – Side Console

The 4.80 Brumby Side Console is the ideal layout for the hardcore fisherman.

The boat can be driven either in the standing or seated position (optional seat and pedestal is required).

The Side Console itself has an appealing rounded design, built-in storage facilities and a user-friendly dash layout for electronics and gauges.

A 70 litre underfloor fuel tank provides more options for the offshore fisherman and is easily re-fuelled via the gunwale mounted fuel filler.

Stainless steel bow and hand rails are standard accessories, as is the rear fold down lounge which provides comfortable stern seating.

If more seating, storage or a full height front casting deck is required then the optional front lounge and front casting deck insert is available.

The 4.80 Brumby Side Console has good looks and versatility, but it’s the awesome on water performance that has to be experienced to be believed.

4.80 Brumby – Rear Centre Console

The 4.80 Brumby Rear Centre Console has built a huge reputation as a premier fishing craft in the short time it has been available on the market.

The 4.80 Brumby Rear Centre Console has a large open forward deck space and is the choice for those who are serious about their sport of fishing.

The console is situated in the central aft section of the boat, where the fold down rear lounge provides seating for the driver and crew. The rear fold down lounge can be either folded away when not in use or utilized as a rear casting deck.

If a full height front casting deck is required then the optional front lounge and front casting deck insert is available.

Stainless steel bow and hand rails are standard, as is the 70 litre underfloor fuel tank for extended trips.

The 4.80 Brumby Rear Centre Console has good looks and versatility, but it’s the awesome on water performance that has to be experienced to be believed.

4.80 Brumby – Frontrunner

The 4.80 Brumby Frontrunner offers all the benefits of a bow rider, and is an excellent choice for the family and weekend boater.
The front lounge which comes standard with this boat provides for seating and storage in the bow and can also be easily converted into to a large forward casting deck by the addition of the optional front casting deck insert.

Two consoles located mid ships for driver and passenger provide protection from the elements. The boat features comfortable upholstered seating positions.

The dash layout provides easy access and viewing of all electronics and gauges, while the consoles themselves contain large storage facilities.

More seating is located aft via the rear fold down lounge, and a recessed storage area is located in the internal transom wall for storage of larger items such as life jackets and batteries.

A 70-litre underfloor fuel tank is also included as standard for those extended trips. An easy access fuel filling position is located on the wide gunwale for trouble free refuelling.

The main attraction of the 4.80 Brumby Frontrunner is not its good looks and versatility, but rather it’s awesome on water performance. Like all the other Polycrafts, the soft and quiet ride has to be experienced to be believed.

4.80 Brumby – Cuddy Cabin

The 4.80 Brumby Cuddy Cabin is the ideal family and fishing boat as its stylish cabin provides protection from the elements.

The 4.80 Brumby Cuddy Cabin has a huge open rear deck space and is a good choice for those who find themselves boating and/or fishing in more exposed waters.

Stainless steel bow and hand rails are standard, as is the 70 litre underfloor fuel tank for those extended trips.

The 4.80 Brumby Cuddy Cabin has good looks and versatility, but it’s the awesome on water performance that has to be experienced to be believed.

Available in 3 models:
– Centre Console
– Front Runner
– Cuddy Cabin

5.30 Warrior – Centre Console

If you want performance, safety and handling in an offshore fishing boat, then look no further than the 5.30 Warrior Centre Console.

The 5.30 Warrior Centre Console boasts an impressive 2.40 metre beam, high sides and a user friendly layout for offshore fishing.

The deep V hull design has incorporated reverse chines for awesome on water performance and incredible stability at rest.

The extra wide Centre Console unit with stainless screen rail provides protection from the elements for two people behind the high, tinted windscreen.

The Centre Console unit has ample space for dash mounted electronics and gauges, while at the same time incorporating large amounts of storage inside the console itself.

The 5.30 Warrior Centre Console is an impressive, no nonsense fishing platform which is equally at home on the big rivers and impoundments as it is offshore chasing the bluewater pelagics.

5.30 Warrior – Frontrunner

Superb ride and on water performance is what your get from the stylish 5.30 Warrior Frontrunner.

The 5.30 Warrior Frontrunner features a soft, quiet ride in a boat which is big on style and comfort. The superb ride quality comes from the unique Polyethylene hull construction which absorbs on-water vibrations into the hull and not the passengers.

The 5.30 Warrior Frontrunner also features Polycrafts’ unique reverse chines, which are incorporated into the hull for unmatched stability at rest.

The 5.30 Warrior Frontrunner layout is similar to that of a bow-rider, with two consoles situated behind a wrap around windscreen.

A hinged door in the centre of the windscreen provides access to the bow seating, storage bins, and anchor well.

It’s also an incredibly beamy boat with 2.10 meters of internal beam and 2.40 meters of beam overall.

A rear fold down lounge, front lounge and two upholstered swivel seats easily accommodate the maximum carrying capacity of six people, ensuring a relaxing day out on the water for all passengers.

Versatility and style helps make the 5.30 Warrior Frontrunner the ultimate family and weekend recreational boat.

5.30 Warrior – Cuddy Cabin

The 5.30 Warrior Cuddy Cabin provides the best of both worlds as a versatile fishing/family boat.

Fish offshore for the big ones one day, and then pack a picnic lunch and get away to your favourite spot the next.

The 5.30 Warrior Cuddy Cabin boasts an impressive 2.40 metre beam, high sides and a user friendly layout for offshore fishing or family trips in the river.

The deep V hull design has incorporated reverse chines for awesome on water performance and incredible stability at rest.

Available in 2 models:
– Centre Console
– Cuddy Cabin

5.99 Frontier – Centre Console

The 5.99 Frontier Centre Console is all about performance, safety and comfort in a boat which is low maintanence and exceptional value for money.

With awesome on water performance and stability, the 5.99 Frontier Centre Console is a true hardcore fishing boat for the dedicated fishing enthusiast.

The 5.99 Centre Console features a huge amount of internal space thanks to its massive 2.50 metre beam. There is plenty of room, even for up to 6 fisherman and all their gear.

The prominent reverse chines enhance on water performance and disperse water away from the hull for a drier ride. Where the reverse chines really come into their own is when the boat is at rest, by providing exceptional stability.

The extra wide centre console unit features a stainless steel screen rail, built in storage and room for dash mounted electronics .

The wide Centre Console unit also provides protection from wind and spray for two people while they are seated on the two person driver seat with backrest.

Awesome on water performance, built in safety features, low maintenance and an extensive list of standard features make the 5.99 Frontier Centre Console a true offshore boat for the hardcore fisherman.

Take one for a test ride today at your local Polycraft dealer and discover the superior ride and stability features of this great boat.

5.99 Frontier – Cuddy Cabin

The 5.99 Frontier Cuddy Cabin is a true offshore boat that delivers performance, style and comfort in a boat which is exceptional value for money.

The Cuddy Cabin has plenty of room, storage facilities, and is big enough to be used for overnight stays.

A large forward hatch in the Cuddy Cabin provides trouble free access to the anchor well located in the bow of the boat.

The toughened Perspex windscreen provides protection from the elements for occupants, as well as dash mounted electronics. The rear fold down lounge provides comfortable seating while underway, and quickly folds away for unobstructed access to the stern of the boat for fishing and water sports.

Easy access to the boat is gained via the rear steps and boarding rails, with an optional boarding ladder available if required.

Both fisherman and recreational boaters alike will appreciate the huge amount of internal space in this boat, thanks to the massive 2.50 metre beam.

Don’t just take our word for how great this boat performs, try a test drive today at your local Polycraft dealer. The ride, comfort and stability has to be experienced to be believed.